Have you noticed a burnt or unpleasant taste coming from your IGET ONE 12000, even when the device appears to have e-liquid remaining?
A burnt taste can indicate that the heating element or surrounding wicking material is operating under abnormal conditions. It does not necessarily mean that the device is completely empty.
The IGET ONE 12000 is commonly described as having a dual-mesh heating system and two operating modes, Regular and Turbo. However, specifications can vary between product versions, so manufacturer documentation should be used to confirm the exact design.
In this guide, we'll explain the possible causes of a burnt taste, how heating and e-liquid delivery interact, and the safety precautions Australian consumers should understand.
1. Dry Wicking Material Can Cause a Burnt Taste
One of the most common technical explanations for a burnt taste is insufficient e-liquid reaching the heating element.
Many vaping devices use cotton or another absorbent material to transport e-liquid from the reservoir to the coil.
When this material is adequately saturated, the liquid absorbs some of the heat produced during operation.
However, if the wick becomes too dry, the heating element may overheat nearby materials.
This condition is often referred to as a dry hit.
Possible contributing factors include:
Uneven e-liquid distribution.
Restricted liquid delivery to the heating element.
Deterioration of the wicking material.
Excessive heat generation.
Damage to internal components.
A device may therefore contain some e-liquid while the wick immediately surrounding the coil remains insufficiently saturated.
2. Can Turbo Mode Contribute to a Burnt Taste?
The IGET ONE 12000 is advertised with Regular and Turbo operating modes.
These modes are intended to provide different operating characteristics.
If Turbo mode supplies greater electrical power to the heating element, it may generate more heat over the same period.
Higher heat generation can increase the demand on the liquid delivery system.
When e-liquid cannot reach the coil quickly enough, localised overheating may occur.
However, this does not establish that Turbo mode is the cause of a burnt taste in any particular device.
Other factors, including the condition of the wick and coil, may also contribute.
A persistent burnt taste should be treated as a warning sign rather than a reason to continue activating the device.
3. The Heating Coil May Have Accumulated Deposits
Heating elements can accumulate deposits from e-liquid ingredients during operation.
These deposits may affect heat transfer and create uneven temperature distribution across the coil surface.
Over time, this can contribute to changes in aerosol production and unpleasant tastes.
In addition, repeated overheating can damage the surrounding wicking material.
Once the wick has been scorched, a burnt taste may persist even if e-liquid remains in the reservoir.
Because sealed disposable devices are generally not designed for internal servicing, consumers should not attempt to open the device to clean or replace the heating components.
4. Why Does My IGET ONE Taste Burnt When It Still Shows E-Liquid?
Some vaping devices use electronic indicators to estimate remaining e-liquid.
However, these displays may not directly measure how much liquid is reaching the heating element.
Depending on the design, an indicator may estimate remaining liquid using previous usage information.
This means the display may show e-liquid remaining even when the wick is inadequately saturated.
There is an important difference between:
E-liquid remaining in the reservoir.
E-liquid available at the heating element.
A device may contain liquid but still experience problems delivering it to the coil.
Therefore, an indicator showing remaining e-liquid does not guarantee normal heating conditions.
5. Repeated Heating May Increase the Risk of Overheating
Every activation generates heat inside the device.
When heating occurs repeatedly, internal temperatures may increase, particularly if the liquid delivery system cannot keep up with the heating demand.
This may contribute to:
Dry or scorched wicking material.
Changes in aerosol composition.
Unpleasant burnt flavours.
Deterioration of heating components.
Reduced device performance.
The exact outcome depends on the device's design, power settings and operating conditions.
If a burnt taste develops repeatedly, discontinue use rather than attempting to force the device to operate normally.
6. Can Australian Summer Heat Affect an IGET ONE 12000?
Australia's climate can affect battery-powered electronic devices.
During summer, vehicles and enclosed spaces exposed to direct sunlight can reach high temperatures.
Excessive heat may affect internal materials, battery condition and e-liquid properties.
Although high ambient temperature is not the only cause of burnt tastes, poor storage conditions can contribute to device deterioration.
Avoid leaving vaping devices:
Inside hot vehicles.
In direct sunlight.
Near heaters or other heat sources.
In locations where batteries may be exposed to excessive temperatures.
If a device becomes unusually hot, swells, leaks or shows physical damage, stop using it.
7. Is It Safe to Keep Using an IGET ONE That Tastes Burnt?
A persistent burnt taste may indicate abnormal heating or damaged internal materials.
Overheating can cause thermal decomposition of e-liquid ingredients and wicking materials, potentially changing the chemical composition of the aerosol.
A burnt taste alone cannot determine which substances are present or their concentrations.
However, it is a reason to discontinue use rather than continue heating the device.
The following observations deserve particular attention:
Warning signPossible explanationRecommended responsePersistent burnt tasteDry wick or damaged heating componentsStop using the deviceBurnt taste despite remaining liquidInadequate liquid deliveryDo not continue heatingUnusually hot casingPotential overheating or electrical faultDiscontinue useLeakage or visible damageSeal or internal component failureDo not charge or useSwelling, smoke or hissingPotential battery failureKeep clear and seek urgent safety assistanceDo not dismantle, puncture or attempt to repair a sealed IGET ONE device.
8. What Should You Do With a Damaged IGET ONE in Australia?
Battery-powered vaping devices may contain lithium-ion batteries and electronic components.
These materials require appropriate handling at the end of the device's usable life.
In Australia, devices containing batteries should not be placed in ordinary household rubbish or kerbside recycling bins.
Improper disposal can create fire risks during waste collection and processing.
Contact your local council or an authorised e-waste collection service for advice on accepting complete vaping devices.
Not all battery recycling points accept devices with embedded batteries.
If the battery is swollen, leaking, smoking or unusually hot, seek specific safety guidance rather than taking it directly to a standard collection bin.